Point-of-care applicable metabotyping using biofluid-specific electrospun MetaSAMPs directly amenable to ambient LA-REIMS.

In recent years, ambient ionization mass spectrometry (AIMS) including laser ablation rapid evaporation IMS, has enabled direct biofluid metabolome analysis. AIMS procedures are, however, still hampered by both analytical, i.e., matrix effects, and practical, i.e., sample transport stability, drawbacks that impede metabolome coverage. In this study, we aimed at developing biofluid-specific metabolome sampling membranes (MetaSAMPs) that offer a directly applicable and stabilizing substrate for AIMS. Customized rectal, salivary, and urinary MetaSAMPs consisting of electrospun (nano)fibrous membranes of blended hydrophilic (polyvinylpyrrolidone and polyacrylonitrile) and lipophilic (polystyrene) polymers supported metabolite absorption, adsorption, and desorption. Moreover, MetaSAMP demonstrated superior metabolome coverage and transport stability compared to crude biofluid analysis and was successfully validated in two pediatric cohorts (MetaBEAse, n = 234 and OPERA, n = 101). By integrating anthropometric and (patho)physiological with MetaSAMP-AIMS metabolome data, we obtained substantial weight-driven predictions and clinical correlations. In conclusion, MetaSAMP holds great clinical application potential for on-the-spot metabolic health stratification.

Understanding the effect of spatial positioning of coated blade spray devices relative to the mass spectrometry inlet on different instrument platforms and its application to quantitative analysis of fentanyl and related analogs.

RATIONALE: We evaluated the effect that the spatial positioning of coated-blade spray (CBS) devices with respect to the mass spectrometry (MS) inlet has when coupling to diverse MS platforms (i.e., triple quadrupole, linear ion trap and time of flight). Furthermore, as a proof of concept, we evaluated CBS-MS as a tool for quantitation of fentanyl and four analogues on said instruments. METHODS: Custom-made MS interfaces were made to accurately position the blade in front of the MS inlet. CBS devices, coated with hydrophilic-lipophilic balanced particles, were used for both the optimization of the CBS position and the quantitation of fentanyl and analogues in urine and plasma samples on all instruments. RESULTS: The SCIEX triple quadrupole instrument was the most sensitive to the position of the blade due to the presence of a curtain gas flowing laminarly out of the MS inlet. After optimization, the analytical capabilities of CBS on each instrument were assessed and the results obtained on both SCIEX and Waters platforms matched the performance obtained using a more advanced instrument by ThermoFisher Scientific. Furthermore, excellent figures of merit were attained for the quantitation of fentanyl and analogues on both triple quadrupole and linear ion trap platforms. CONCLUSIONS: We demonstrated that optimization of MS parameters on different instrument vendors and front ends, such as the position of the CBS tip regarding the MS inlet, is vital to exploit the full quantitative potential of this technology. Application of the technology to screen and quantify fentanyl and analogues showed great potential when considering its coupling with portable mass spectrometers for therapeutic drug monitoring and point-of-care applications.

High throughput determination of free biogenic monoamines and their metabolites in urine using thin-film solid phase microextraction.

UPLC-MS/MS methods are the gold standard for routine, high-throughput measurements of biogenic monoamines for the diagnosis of catecholamine-producing tumors. However, this cannot be achieved without employing efficient sample pretreatment methods. Therefore, two pretreatment methods, thin-film solid phase microextraction (TF-SPME) and packed fibers solid phase extraction (PFSPE), were developed and evaluated for the analysis of biogenic monoamines and their metabolites in urine. A hydrophilic-lipophilic balance (HLB) coating was chosen for the thin-film blade format SPME method and compared with a Polycrown ether (PCE) composite nanofiber used as an adsorbent for the PFSPE method. Under optimal conditions, the absolute extraction recovery and relative matrix effect of the newly developed TF-SPME method were determined to be 35.7-74.8% and 0.47-3.63%, respectively. The linearity was 0.25-500 ng mL-1 for norepinephrine, epinephrine, dopamine, normetanephrine 3-methoxytyramine, serotonin, histamine, and 0.1-500 ng mL-1 for metanephrine. The intra-and inter-assay coefficients of variation were 0.7-8.7%, and the respective accuracies were calculated to be 90.8-104.7% and 89.5-104.5% for TF-SPME. Compared with the PFSPE method, the TF-SPME method had a higher extraction efficiency, lower matrix effects and a wider linear range for eight target substances, which ensured higher accuracy of simultaneous detection of all compounds of interest. Therefore, the proposed TF-SPME method can be employed for the high throughput screening for neuroendocrine tumors in a routine clinical setting and other relative research by simultaneous quantitation of urine eight biological monoamines in a single run.

High-throughput biomonitoring of organophosphate flame-retardant metabolites in urine via 96-blade solid-phase microextraction coupled with ultra-performance liquid chromatography-tandem mass spectrometry.

Organophosphate flame retardants (OPFRs) are widely used in consumer products and building materials, but their propensity for migration poses a problem with respect to polluting indoor environments, water, soil, and dust. OPFR metabolites in urine samples are appropriate biomarkers for assessing exposure risk levels. In this paper, a high-throughput method that couples 96-blade solid-phase microextraction with ultra-performance liquid chromatography-tandem mass spectrometry (SPME-UPLC-MS/MS) is applied for the simultaneous detection of four OPFR metabolites in urine samples. The results indicated that the best extraction was achieved using 96 blades coated with hydrophilic-lipophilic balance weak anion exchange (HLB-WAX). The proposed SPME method's extraction efficiency was maximized by optimizing extraction time, pH value, desorption solution, desorption volume, and desorption time, and it was validated in accordance with the Food and Drug Administration's guidelines. The findings indicated that the proposed method has a wide linearity range (0.5-100 ng mL-1) and low detection limits (0.09-0.14 ng mL-1). The method's accuracy ranged from 98% to 118%, with intra-day precision ranging from 1% to 10%. In contrast, inter-day precision ranged from 3% to 16%. Accuracy was also evaluated using independent urine samples, which ranged from 78% to 124% with corresponding relative standard deviations (1%-16%). Ultimately, DoCP was detected in two real samples at a concentration of 0.5-1.1 ng mL-1, and BEHP was detected at a concentration of 0.2-1.2 ng mL-1. Overall, the proposed SPME-UPLC-MS/MS method is reliable, accurate, and capable of simultaneously determining four OPFR metabolites in urine samples and screening them to assess exposure risk for humans.

Solid-phase microextraction- probe electrospray ionization devices for screening and quantitating drugs of abuse in small amounts of biofluids.

Probe electrospray ionization (PESI) is an ambient ionization mass spectrometry technique (AIMS) that is primarily used in qualitative studies, though researchers have recently combined it with sample preparation for the quantitative analysis of various analytes in biological matrices. This study presents a method that integrates solid-phase microextraction with PESI for direct coupling to a triple quadrupole mass spectrometer, and examines its ability to quantitate drugs of abuse. Intra- and inter-probe reproducibility experiments were conducted to assess the stability and reproducibility of the extraction-phase-coated PESI probes (coating length: 2 mm; coating thickness: 6.5 µm). This research is the first documented instance wherein highly sensitive determinations were successfully attained using these microextraction and micro-desorption techniques in conjunction with small volumes of sample and extraction phase. A mixture consisting of IPA/H2O (1/1 v/v) + 0.1% FA was determined to be the optimal desorption solvent for SPME-PESI-MS/MS, as it facilitated high analyte enrichment in a picolitre of the solvent, which acted at the same time as efficient electrospray media. Furthermore, a method of quantifying drugs of abuse in 30 µL of plasma without matrix modification was also developed. This method had an intra-day accuracy within the 80-120% range for all eight drugs of abuse at concentrations of 3, 30, and 90 pg µL-1; the exception to this result was lorazepam at 30 pg µL-1, which had an intra-day accuracy of 122%. The lower limit of quantification (LLOQ) for fentanyl and nordiazepam was pg µL-1; the LLOQ for buprenorphine, codeine, diazepam, lorazepam, and propranolol was 5 pg µL-1; and the LLOQ of oxazepam was 10 pg µL-1.

Direct immersion thin film solid phase microextraction of polychlorinated n-alkanes in cod liver oil.

A thin film-solid phase microextraction (TF-SPME) method was developed to test for 5 individual polychlorinated n-alkanes (PCAs) from commercial cod liver oil samples. This was accomplished by preparing a novel aluminum supported, hydrophilic-lipophilic balance/polydimethylsiloxane (HLB/PDMS) TF-SPME device that enabled direct immersion extraction from fish oil. Matrix-matched calibration gave a linear range from 0.075 µg/g to 0.75 µg/g with method limits of quantitation (MLOQ) ranging from 0.07 µg/g to 0.217 µg/g in oil. Standard addition calibration was performed using other fish oils demonstrating comparable slope to the external calibration. As a proof of concept, four fish oil brands were tested for contaminants; 1,1,1,3-tetrachlorodecane, 1,2,9,10-tetrachlorodecane, 1,2,13,14-tetrachlorotetradecane, and 1,1,1,3,14,15-hexachloropentadecane were detected above the MLOQ but below the range provided by the Stockholm Convention. This method provides an effective approach for cleanup and preconcentration of PCAs from oily matrices using inexpensive, and reusable microextraction devices that limit environmental impact of the sample preparation protocol.

Comprehensive Analysis of Multiresidue Pesticides from Process Water Obtained from Wastewater Treatment Facilities Using Solid-Phase Microextraction.

A novel magnetic blade spray-tandem mass spectrometry (MBS-MS/MS) assay was developed and optimized, and its performance was characterized for the analysis of 204 pesticides from wastewater treatment facility (WWTF) process water. These results were compared and experimentally validated with an untargeted, high-resolution MS (HRMS) approach that employed liquid chromatography (LC)-amenable thin-film microextraction (TFME) devices to further elucidate the fate of pesticides through the WWTF process. As a result of our optimizations, we report an optimized workflow with an extraction time of 10 min, 150 µg of magnetic HLB particles, and 5 s of desorption. Excellent linearity was obtained for 168 of the 204 pesticides in deionized water, where 90% of the quantifiable pesticides had a determination coefficient (R2) of 0.99 across 3 orders of magnitude and 80% had limits of quantification below 0.5 ng/mL. We subsequently applied our optimized MBS-MS/MS method for the analysis of samples collected during the various stages of wastewater treatment from two WWTFs in Southern Ontario. This article presents a new streamlined methodology with a fast turnaround time for analyzing a large panel of pesticides, ultimately providing us the opportunity to evaluate the performance of two WWTFs for their efficacy in removing these toxic chemicals.

Development of a Drone-Based Thin-Film Solid-Phase Microextraction Water Sampler to Facilitate On-Site Screening of Environmental Pollutants.

To simplify on-site water sampling and screening, particularly in hard-to-reach or dangerous sites, a drone equipped with a hydrophilic-lipophilic balance (HLB), thin-film solid-phase microextraction (TF-SPME) sampler was developed. The drone-based sampler was shown to protect the sorbent phase from external contamination while preventing any detectable loss of components of a spiked modified McReynolds mixture on the membrane in the sampler for at least 10 min. HLB/poly(dimethylsiloxane) (PDMS) membranes deployed in flight on the drone sampler were demonstrated to extract disinfection by-products, including trichloromethane, dichloroacetonitrile, 1,1,1-trichloro-2-propanone, 2,2,2-trichloroethanol, benzonitrile, and benzyl nitrile, from hot tub water. When analyzed on-site, in duplicate, using hand-portable instrumentation, reasonably repeatable results were achieved (%relative standard deviations (RSD's) 5-16%). Finally, drone TF-SPME sampling of an anthropogenically impacted watercourse indicated that impact from the suspected nearby landfill site was minimal, instead suggesting that internal combustion by-products from vehicles on the nearby Highway 401 played a much larger role in contaminating the watercourse. This conclusion was supported by the confirmed presence of BTEX, styrene, isopropylbenzene, propylbenzene, and 1,3,5-trimethylbenzene. In addition to immediately identifying these compounds on-site using portable gas chromatography-mass spectrometry (GC-MS), samples were taken back to the laboratory for benchtop analysis, further supporting this conclusion.

Development of thin-film solid-phase microextraction coating and method for determination of artificial sweeteners in surface waters.

A semi-automated and sensitive method was developed for simultaneous determination of the six most consumed artificial sweeteners (AS) in surface waters using thin-film solid-phase microextraction (TF-SPME) and high-performance liquid chromatography (HPLC). A triple quadrupole mass spectrometer and an electrospray ionization source (ESI-MS) run in negative ionization and multiple reaction monitoring modes were employed for instrumental analysis. The TF-SPME method was optimized for the extraction phase, sample pH, desorption solvent, extraction time, and desorption time. In-house-synthetized-hydrophilic-lipophilic balance weak anion exchange (HLB-WAX) particles imbedded within a polyacrylonitrile (PAN) binder were selected as the extraction phase for the thin-film coating due to their cost-effectiveness and enhanced sensitivity for artificial sweeteners. Suitable analytical parameters that include linearity (R2 > 0.9914), recovery > 80%, inter, and intra-reproducibility less than 18% were obtained for the AS compounds studied. The developed method estimated limits of detection (LODs) ranging from 0.004 to 0.038 ng mL-1 The SPME method was successfully applied for the determination of ultra-trace levels of AS in water samples collected from Grand River (Ontario, Canada), downstream of three municipal wastewater treatment plants (WWTPs). Concentrations ranging from 0.03 to 20.3 ng mL-1 were found for the AS compounds studied.

Recent advances in breath analysis to track human health by new enrichment technologies.

Detection of biomarkers in exhaled breath has been gaining increasing attention as a tool for diagnosis of specific diseases. However, rapid and accurate quantification of biomarkers associated with specific diseases requires the use of analytical methods capable of fast sampling and preconcentration from breath matrix. In this regard, solid phase microextraction and needle trap technology are becoming increasingly popular in the field of breath analysis due to the unique benefits imparted by such methods, such as the integration of sampling, extraction, and preconcentration in a single step. This review discusses recent advances in breath analysis using these sample preparation techniques, providing a summary of recent developments of analytical methods based on breath volatile organic compounds analysis, including the successful identification of various biomarkers related to human diseases.

Comparison of Solid-Phase Microextraction to Solvent Extraction and QuEChERS for Quantitative Analysis of Veterinary Drug Residues in Chicken and Beef Matrices.

A fully automated high-throughput method using solid-phase microextraction (SPME) was developed and validated for quantitative analysis of more than 100 veterinary drugs in chicken and beef tissue. The work also encompassed a comparison of the SPME method to two well-documented sample preparation procedures, solvent extraction (SE) and quick, easy, cheap, effective, rugged, and safe (QuEChERS). SPME showed considerably less matrix effects, with only two compounds showing significant matrix effects in comparison to 30% of analytes in QuEChERS and 42% in SE in beef tissue. Excellent accuracy and precision results were achieved with all methods in the chicken matrix, with more than 91% of analytes falling within the 70-120% range of their true concentrations and relative standard deviation of ≤25% at 0.75X and 1.5X, where X is the maximum residue level. Similar results were achieved in beef tissue. All methods were able to meet regulatory limit of quantitation levels for the majority of target analytes.

Miniaturized SPME tips directly coupled to mass spectrometry for targeted determination and untargeted profiling of small samples.

The analysis of small sample volumes, such as biofluids, tissues, and cells, has become increasingly popular over the past few years. In this paper, we introduce a sample-preparation tool that is suitable for such analysis, namely, a solid-phase microextraction (SPME) minitip featuring a tip apex (1 mm) that is coated with biocompatible polyacrylonitrile (PAN) and N-vinylpyrrolidone-co-divinylbenzene, also known as HLB particles. HLB particles are suitable for extracting a wide range of compounds with varying polarities, and the proposed SPME minitips were successfully used for the targeted (MS/MS) quantitation of polar, semi-polar, and nonpolar drugs of abuse (DoAs) in 1 µL of blood via offline nanoelectrospray ionization (nESI). Low limits of detection (LOD) and quantification (LOQ) were obtained for most of the targeted analytes (i.e. LODs between 0.5 and 2.5 ng mL-1). In addition, untargeted metabolomic profiling was performed on a single caviar egg (diameter ≤2.9 mm), with analysis being conducted via liquid chromatography high-resolution mass spectrometry (LC/HRMS). Clear chromatographic peaks were obtained despite the small size of the caviar eggs and the dilution introduced by LC. Multidimensional statistical analysis (PCA & PLS-DA) showed that the SPME minitips were able to successfully discriminate between samples, and the compounds that were tentatively identified corresponded with those expected to be found in fish. These findings highlight the importance of using suitable materials for pre-concentrating probe-sampling approaches, as they can provide analysts with sensitive instrumental response, particularly when studying the chemical profiles of small organisms.

Solid Phase Microextraction-Based Miniaturized Probe and Protocol for Extraction of Neurotransmitters from Brains in Vivo.

Despite the importance of monitoring and correlating neurotransmitter concentrations in the brain with observable behavior and brain areas in which they act, in vivo measurement of multiple neurochemicals in the brain remains a challenge. Here, we propose an alternative solid phase microextraction-based (SPME) chemical biopsy approach as a viable method for acquirement of quantitative information on multiple neurotransmitters by one device within a single sampling event, with multisite measurement capabilities and minimized invasiveness, as no tissue is removed. The miniaturized SPME probe developed for integrated in vivo sampling/sample preparation has been thoroughly optimized with respect to probe shape, desorption solvent, and extracting phase tailored for extraction of small hydrophilic molecules via synthesis and functionalization of the SPME coating. Experimental evaluations of sampling time and storage strategy led to achieving appropriate temporal resolution versus recovery balance as well as little or no analyte loss, respectively. Validation of the developed SPME-HPLC-MS/MS protocol in a surrogate brain matrix yielded satisfactory accuracies of 80-100%, precision below 17%, as well as linear dynamic range and limits of quantitation suitable for determining neurochemicals at physiologically relevant levels. Finally, we present a proof-of-concept in vivo application in macaque brain, where several target neurotransmitters were extracted simultaneously from three brain areas. The developed probe and protocol are herein presented as a potential powerful addition to the existing in vivo toolbox for measurements of local levels of neurochemicals in multiple brain systems implicated in the neuropathology of psychiatric disorders.

Direct Coupling of Dispersive Extractions with Magnetic Particles to Mass Spectrometry via Microfluidic Open Interface.

Microextraction coupled to mass spectrometry (MS) has great potential in analytical chemistry laboratories operating in a variety of fields. Indeed, microextraction methods directly coupled to MS can be of large value given that they can provide not only analyte extraction and enrichment but also effective sample cleanup. In recent years, the practicality in handling high active surface area, versatility, and environmentally friendly features of magnetic dispersive microextraction technologies has contributed to an explosion in the number of methods and technologies reported in the literature for a wide range of applications. However, to the best of our knowledge, no technology to date has been capable of efficiently merging these two rising concepts in a simple and integrated analytical workflow. In this context, the microfluidic open interface is presented for the direct coupling of dispersive magnetic extraction to mass spectrometry. This technology operates under the concept of a flow-isolated desorption volume, which generates a stagnant droplet open to ambient conditions while continuously feeding the ionization source with solvent by means of the self-aspiration process intrinsic of the electrospray ionization (ESI) interface. To improve the efficiency of the final analytical workflow, a novel dispersive magnetic micro- and nanoparticle extraction protocol for biofluid droplets was developed. The final methodology entailed the dispersion of a small amount of magnetic particles (20-70 µg) in a droplet of biofluid (≤40 µL) for extraction, followed by a particle collection step using a homemade 3D-printed holder containing an embedded rare-earth magnet. In the final step, the holder is set on top of the microfluidic open interface (MOI) for desorption in the isolated droplet. Switching the valve transfers the desorbed analytes to the ESI source in less than 5 s. As proof of concept, the completely new setup was applied to the determination of prohibited substances from phosphate-buffered saline (PBS) and human urine using Fe2O3 magnetic nanoparticles (50 nm) functionalized with C18. The limits of quantitation (LOQs) obtained were in the low-ppb range in all cases, and acceptable precision (≤20%) and accuracy (80-120%) were attained. Also, taking advantage of the fast extraction kinetics provided by the radial diffusion associated with small particles, we employed the methodology for the selective extraction of phosphopeptides from 40 µL of tryptic ß-casein digest using 70 µg of magnetic Ti-IMAC microparticles. To conclude, the technology and methodology herein presented provided excellent capabilities comparable to those of other solid-phase microextraction (SPME-MS) approaches while dramatically minimizing the amount of sample and sorbent required per analysis, as well as affording significantly fast extraction times due to the enhanced kinetics of extraction.

Development and validation of a fully automated solid phase microextraction high throughput method for quantitative analysis of multiresidue veterinary drugs in chicken tissue.

This paper presents the development and validation of a fully automated, high-throughput multiclass, multiresidue method for quantitative analysis of 77 veterinary drugs in chicken muscle via direct immersion solid phase microextraction (DI-SPME) and ultra-high pressure liquid chromatography-electrospray ionization - tandem mass spectrometry (UHPLC-ESI-MS/MS). The selected drugs represent more than 12 different classes of drugs characterized by varying physical and chemical properties. A Hydrophilic-lipophilic balance (HLB)/polyacrylonitrile (PAN) extraction phase, prepared using HLB particles synthesized in-house, yielded the best extraction/desorption performance among four different SPME extraction phases evaluated in the current work. The developed SPME method was optimized in terms of SPME coating and geometry, desorption solvent, extraction and rinsing conditions, and extraction and desorption times. Multivariate analysis was performed to determine the optimal desorption solvent for the proposed application. The developed method was validated according to the Food and Drug Administration (FDA) guidelines, taking into account Canadian maximum residue limits (MRLs) and US maximum tolerance levels for veterinary drugs in meat. Method accuracy ranged from 80 to 120% for at least 73 compounds, with relative standard deviation of 1-15%. Inter-day precision ranged from 4 to 15% for 70 compounds. Determination coefficients values were higher than 0.991 for all compounds under study with no significant lack of fit (p > 0.05) at the 5% level. In terms of limits of quantitation, the method was able to meet both Canadian and US regulatory levels for all compounds under study.

Development of a Hydrophilic Lipophilic Balanced Thin Film Solid Phase Microextraction Device for Balanced Determination of Volatile Organic Compounds.

A novel hydrophilic-lipophilic balanced (HLB) thin film solid-phase microextraction (TF-SPME) device is proposed for polarity-balanced determinations of volatile organic compounds. The proposed HLB particles used in the preparation of these membranes were prepared using a precipitation polymerization technique and determined to have a specific surface area of 335 m2/g with an average pore diameter of 13 Å. Membranes prepared from these particles were found to extract 1.8, 2.2, 1.9, 1.7, 2.0, and 1.3 times more benzene, 2-pentanone, 1-nitropropane, pyridine, 1-pentanol, and octane, respectively, than the established divinylbenzene/polydimethylsiloxane (DVB/PDMS)-based membranes. Furthermore, membranes prepared from these lab-made particles were shown to extract significantly ( p = 0.00047) larger amounts of these analytes than membranes prepared from comparative commercial HLB particles. The intermembrane extraction efficiency between 3 membranes was determined to be reproducible at 95% confidence for 4 different coating chemistries tested, including the DVB/PDMS membranes, and those prepared with 3 different HLB compositions. Furthermore, method reliability was established by confirming that, once extracted, modified McReynolds standards were stable on the HLB/PDMS membranes stored in thermal desorption tubes on an autosampler rack for at least 120 h, for 5 of the 6 standards, but only for 24 h for pyridine at a 95% level of confidence. Finally, using a TF-SPME enabled, portable GC/MS instrument, an entirely on-site proof of concept application was performed for the determination and quantitation of chlorination byproducts in a private hot tub, successfully identifying chloroform, bromodichloromethane, dichloroacetonitrile, chlorobenzene, benzonitrile, and benzyl chloride, while further quantifying chloroform and dichloroacetonitrile at levels of 270 and 79 ppb with %RSD values of 13% and 5%, respectively.

Effect of Transport Parameters and Device Geometry on Extraction Kinetics and Efficiency in Direct Immersion Solid-phase Microextraction.

An alternative strategy to increase mass transfer entails geometry optimization of the extraction systems including design of solid-phase microextraction (SPME) probes. In this work, a computational model was employed to elucidate practical aspects such as efficiency and kinetics of extraction by employing several new geometries. Extraction of a model analyte at static conditions with the configurations, such as thin-film, fiber, coated tip, and nanoparticles, was numerically simulated to obtain an in-depth understanding of the advantages and limitations of each geometry in microextraction and exhaustive modes. The attained results associated with the equilibration time dependency on shape were in good agreement with previously reported experimental observations. They demonstrate that the mass-transfer is highly dependent on the size and shape of the coatings and increases with a decrease in size of the devices particularly rapidly below 10 µm caused by radial diffusion effect. Nevertheless, extractions performed using octadecyl-functionalized magnetic nanoparticles demonstrated that higher enrichment factors are achievable with the use of a fewer number of particles in comparison to factors achieved via exhaustive extraction, where a larger number of particles must be employed, confirming theoretical predictions. The conclusions reached are valid for any extraction method. The results obtained herein are very useful toward the design and optimization of future extraction technologies and approaches.

Analysis of chemical warfare agents in organic liquid samples with magnetic dispersive solid phase extraction and gas chromatography mass spectrometry for verification of the chemical weapons convention.

A simple, sensitive and low temperature sample preparation method is developed for detection and identification of Chemical Warfare Agents (CWAs) and scheduled esters in organic liquid using magnetic dispersive solid phase extraction (MDSPE) followed by gas chromatography-mass spectrometry analysis. The method utilizes Iron oxide@Poly(methacrylic acid-co-ethylene glycol dimethacrylate) resin (Fe2O3@Poly(MAA-co-EGDMA)) as sorbent. Variants of these sorbents were prepared by precipitation polymerization of methacrylic acid-co-ethylene glycol dimethacrylate (MAA-co-EGDMA) onto Fe2O3 nanoparticles. Fe2O3@poly(MAA-co-EGDMA) with 20% MAA showed highest recovery of analytes. Extractions were performed with magnetic microspheres by MDSPE. Parameters affecting the extraction efficiency were studied and optimized. Under the optimized conditions, method showed linearity in the range of 0.1-3.0µgmL(-1) (r(2)=0.9966-0.9987). The repeatability and reproducibility (relative standard deviations (RSDs) %) were in the range of 4.5-7.6% and 3.4-6.2% respectively for organophosphorous esters in dodecane. Limits of detection (S/N=3/1) and limit of quantification (S/N=10/1) were found to be in the range of 0.05-0.1µgmL(-1) and 0.1-0.12µgmL(-1) respectively in SIM mode for selected analytes. The method was successfully validated and applied to the extraction and identification of targeted analytes from three different organic liquids i.e. n-hexane, dodecane and silicon oil. Recoveries ranged from 58.7 to 97.3% and 53.8 to 95.5% at 3µgmL(-1) and 1µgmL(-1) spiking concentrations. Detection of diethyl methylphosphonate (DEMP) and O-Ethyl S-2-diisopropylaminoethyl methylphosphonothiolate (VX) in samples provided by the Organization for Prohibition of Chemical Weapons Proficiency Test (OPCW-PT) proved the utility of the developed method for the off-site analysis of CWC relevant chemicals.

Magnetic hydrophilic-lipophilic balance sorbent for efficient extraction of chemical warfare agents from water samples.

Magnetic hydrophilic-lipophilic balance (MHLB) hybrid resin was prepared by precipitation polymerization using N-vinylpyrrolidone (PVP) and divinylbenzene (DVB) as monomers and Fe2O3 nanoparticles as magnetic material. These resins were successfully applied for the extraction of chemical warfare agents (CWAs) and their markers from water samples through magnetic dispersive solid-phase extraction (MDSPE). By varying the ratios of monomers, resin with desired hydrophilic-lipophilic balance was prepared for the extraction of CWAs and related esters of varying polarities. Amongst different composites Fe2O3 nanoparticles coated with 10% PVP+90% DVB exhibited the best recoveries varying between 70.32 and 97.67%. Parameters affecting the extraction efficiencies, such as extraction time, desorption time, nature and volume of desorption solvent, amount of extraction sorbent and the effect of salts on extraction were investigated. Under the optimized conditions, linearity was obtained in the range of 0.5-500 ng mL(-1) with correlation ranging from 0.9911-0.9980. Limits of detection and limits of quantification were 0.5-1.0 and 3.0-5.0 ng mL(-1) respectively with RSDs varying from 4.88-11.32% for markers of CWAs. Finally, the developed MDSPE method was employed for extraction of analytes from water samples of various sources and the OPCW proficiency test samples.